The Velocity/Positioning mode select is in the lower right of the window when the master PowerFlex 525 drive is selected.Just place a rung before your (Drive):O.Start bit to energize the stop bit on the inverse of the start logic. If keying is not required, select “Disable Keying.” Drives do not require keying, and so “Disable Keying” is recommended. See the online Help for additional information on this and other Electronic Keying settings.
Therefore, ensure that you have set the correct revision in this window. Physical module is consistent with the software configuration before the controller and bridge make a connection. The “Compatible Module” setting for Electronic Keying ensures the After downloading the file, close the Module Definition window and then re-open it to display the new revision.Įlectronic Keying Compatible Module. Web Updates web site to download a specific database file.
Create Database… Creates a database from an online network multi-drive.To get the correct database revision, use one of the following buttons at the bottom left of the Module Definition window: If the drive’s major and minor revision is not available, the drive database is not installed on your computer. The major and minor revision of the firmware (database) in the drive. To get the drive rating, use the Create Database…, or Web Update… button described above. If the drive rating is not listed, the drive database is not installed on your computer. The voltage and current rating of the drive. You may create a database from a network accessible drive using the Create Database. On the Module Definition window, notice that the automatically-assigned controller tags Drive Status, Feedback, Logic Command, and Reference are always used. In the Module Definition window, edit the following information for the master drive: Rockwell Automation Publication 520COM-UM001B-EN-E - March 2013
0 kommentar(er)
